HOME > Products > Construction Chemicals > NO MORE RUST (Anti-rust)
Superb workability Strong anti-rust capability!
Anti-corrosion, weather proof, chemical resistance
Other company's anti-rust paint
SOMAY-Q NO MORE RUST
◀
POWERFUL!
The result after 6000 hours of SST.
No rusting within the NO MORE RUST area!
QUICK!
Two coats of undercoating, which are necessary for construction with general anti-rust paint, and an intermediate coat are also required.
NO MORE RUST shortens the undercoat to one time. This has made it possible to significantly reduce the overall work process.
The construction period was reduced from
10 days to 6 days!
GENERAL
The most time-consuming cleaning work is kept to a minimum
The most difficult cleaning work in anti-rust coating is OK with 3 types of cleaning that leaves the active film and removes rust and floating paint film. Usual process requires under coat twice and, in addition, intermediate coat. NO MORE Rust requires only one application. Achieves 43% reduction (※) of total application process.
Strong adhesion for a long time / Prevent rust
The secret is nanotechnology. Compared to conventional color pigment , the nano-sized particles penetrate in depth into the coating surface and maintain long-term adhesiveness!
A
B
Salt Spray Test (SST) 6,000 hours
equivalent to 12 years of real environment
A (top) epoxy coating (made by another company)
B (bottom) EP039
Testing Method : JIS K-5600-7-1:1999 35℃/5% sodium chloride aqueous solution continuous atomization
Amazing cost performance!
Reduces the number of coatings by improving adhesion to the coating surface. In addition, by reducing the coating process, the shortning process(*) by approximately 42.86%, improving construction
The lineups
NO MORE RUST EP039
Base Coating
Can be widely used as a primer for preventing the rust, corrosion and degradation on the surface of rusted metal, steel, galvanizing, molten zinc, non-ferrous metal, active coatings and concrete. Superb workability as the preparation can be completed with the least sanding(SP2, St.2)and only one application would be enough to form the coating, resulting the huge cost savings.
【Color】Ivory
【Quantity】10kg set (Part A, Part B 5kg ea.)
【Theoretical Spreading Rate】Approx. 37m2 (265g/m2)
【Fully time 】Approx. 16 hours (at 20℃ 60% humidity)
【Mixing Ratio】 Part A:Part B = 1:1 (weight ratio)
【Color】Select from Japan Paint Industry Association No.
【Quantity】4.2kg set (Part A 3.5kg, Part B 0.7kg)
【Theoretical Spreading Rate】Approx. 35m2 (120g/m2)
【Fully time 】Approx. 8 hours (at 20℃ 60% humidity)
【Mixing Ratio】 Part A:Part B = 5:1 (weight ratio
NO MORE RUST AP089
Top Coating
Anti-corrosion, weather proof, chemical resistance and shock proof. Top coat which suppresses the rust for a long time. Free from lead and chrome for environment safety. Good match with NO MORE RUST EP039 and enhances the anti-rust capability.
© GSI Creos Indonesia
Plaza Sentral lt. 10 , JL. Jendral Sudirman no.47, Karet Semanggi , Setiabudi , 12930 Jakarta Selatan
+62 21 5702195
info@creos.co.id